Overview
Introduction
D-Link's Nuclias Connect is a versatile, convenient software solution for administrators to manage wireless devices throughout the network from a central point.
This guide is intended to describe the necessary steps and procedures required for a successful installation of the Nuclias Connect software and its environment. The information is divided into four main areas listed as follows:
- Prerequisites
- Environment Configuration
- Nuclias Connect Installation
- Software Verification
By completing each task in the order as described in this manual, you can ensure that the installation of the Nuclias Connect is completed properly in the most efficient way.
Below you will find a list of topics to help you get started:
Downloading the Nuclias Connect Package
Installing Nuclias Connect on Windows
Installing Nuclias Connect in Linux
Prerequisites
| Recommended System Requirements | ||
|---|---|---|
| Scale Size | Larger Scale | Smaller Scale |
| Maximum Managed APs | 1000 APs | 100 APs |
| Recommended CPU | 8th Generation Intel® Core™ i7 Processors |
Intel® Core™ i5 Processors, 3.2 GHz |
| Recommended RAM | 16 G DDR3 | 8 G DDR3 |
| Recommended Storage | 4 TB | 2 TB |
| Ethernet NIC1 | Gigabit Ethernet Card | Gigabit Ethernet Card |
| Monitor Resolution | 1080 P | 1080 P |
| Platform (Windows) | Windows 10 Professional or Server 2016 (64-bit) | Windows 10 Professional (64-bit) |
| Platform (Linux2) |
Ubuntu CentOS 7 |
Ubuntu CentOS 7 |
| Browser for Nuclias Connect Management |
Edge Chrome Safari |
Edge Chrome Safari |
| Recommended Uplink Bandwidth | 20 Mbps for larger scale | 10 Mbps for larger scale |
1 Recommended uplink bandwidth: 20 Mbps for larger scale, 10 Mbps for smaller scale.
2 Docker and Docker Compose toolsets are required for the installation in a Linux platform.